Feiteng

YDST Series Bitumen Decanting Machine

Name: YDST Series Bitumen Decanting Machine
Price: 42000.0 USD
Rating: 5 (1 reviews)

Description

The YDST series bitumen melting machine developed by our company is a self-heating integrated structure. This equipment perfectly combines the thermal oil boiler with the melting equipment.
The equipment uses a diesel burner as a heat source, the barrel bitumen is heated and dumped by hot air and by the thermal oil coils, and then melted into a liquid state.
The machine can guarantee the quality of bitumen heating. In addition to keeping the advantages of DLT series equipment, it has higher thermal efficiency, smaller occupancy, easier installation, more convenient transfer, and lower transportation cost than DLT series equipment.
The equipment has a beautiful appearance, reasonable and compact arrangement, stable and reliable performance, and is suitable for the production of bitumen barrel removal under various working conditions.

Complete Your Road Construction Solution:

Explore our Bitumen Melting Equipment
Explore our Asphalt Storage Tank

View full details

YDST Series Self-Heating Drum Bitumen Decanter

YDST Series Self-Heating Drum Bitumen Decanter is designed for drum-packed bitumen melting where contractors need an integrated heating configuration instead of a separate external thermal oil boiler.

The equipment combines a thermal oil boiler and drum bitumen decanter into one compact unit. It uses a diesel oil burner as the heat source, and melts drum bitumen through hot air heating, thermal oil coils, built-in heating furnace, and flue heat reuse before pumping liquid bitumen to a storage tank.

Why Choose YDST Series

Integrated Self-Heating Structure
YDST Series combines the thermal oil boiler and drum bitumen decanter into one integrated unit, reducing the need to transport and install a separate thermal oil boiler.
Diesel Burner Heating Source
The system uses a diesel oil burner as the heat source, making it suitable for road construction projects and remote asphalt plant support sites where diesel fuel is available.
Hot Air and Thermal Oil Coil Heating
Drum bitumen is heated by hot air and thermal oil coils, while the built-in heating furnace and flue heat reuse help improve heat transfer efficiency.
Compact and Easier Relocation
The integrated structure places the main components on or inside the decanter body, supporting easier transport, faster installation, and more convenient site relocation.

Drum Preparation

Open and lift drums onto the tipping device

Drum-packed bitumen is prepared and lifted onto the tipping device. This process is suitable for project sites that need a compact self-heating drum bitumen melting system.

Closed Decanting

Push drums into the closed decanter chamber

After positioning, drums are pushed into the closed decanter chamber. The enclosed structure helps support safer heating, heat retention, and controlled drum bitumen decanting.

Integrated Heating

Heat with diesel burner, hot air, and thermal oil coils

The built-in diesel burner provides heat for hot air heating and thermal oil coil heating. The built-in heating furnace and flue heating structure help reuse high-temperature heat inside the system.

Melting and Transfer

Collect, heat, and pump liquid bitumen to storage tank

Bitumen released from the drums is collected and heated in the lower chamber. After reaching a pumpable condition, the bitumen pump transfers liquid bitumen to a storage tank or downstream supply system.

Main Components

Decanter Tank
The decanter tank is the main vessel for drum bitumen decanting, liquid bitumen collection, heating, and transfer preparation.
Electric Hoist
The source configuration includes an electric hoist for drum handling. Final lifting arrangement should be confirmed according to site loading method and project layout.
Tipping Device
The tipping device helps position opened drums for decanting. It works with the drum feeding and hydraulic propelling system for drum movement into the chamber.
Diesel Burner
The diesel oil burner is the heating source of the self-heating system. The YDST-10 source data lists a burner heat value of 720,000 kcal.
Built-In Heating Furnace
The built-in heating furnace with thermal oil structure supports integrated heat transfer, reducing dependence on a separate external boiler.
Hydraulic Propelling System
The hydraulic propelling system moves drums into the closed decanter chamber, supporting the drum feeding and decanting process.
Temperature Control System
The diesel burner automatically starts and stops according to the set temperatures of bitumen and thermal oil.
Liquid Level Alarm System
The liquid level alarm system helps monitor material level during operation and supports safer bitumen pumping and transfer management.
Filter and Slag Removal
A filter device in the bitumen circulation tube helps remove slag and impurities from drum bitumen during circulation and transfer.

Key Technical Parameters

The following parameters are organized from the supplied YDST-10 product note. Final configuration should be confirmed according to drum diameter, power supply, site layout, and project capacity requirements.

Item	Specification
Model	YDST-10 / YDST Series
Product Type	Self-heating drum bitumen decanter
Heating Structure	Integrated thermal oil boiler and drum bitumen decanter
Heating Source	Diesel oil burner
Heating Method	Hot air heating, thermal oil coils, built-in heating furnace, and flue heat reuse
Production Rate	8–10 t/h when ambient temperature is above 25°C
Tank Volume	15m³
Drum Quantity	32 drums when drum diameter is 500mm
Applicable Drum Diameter	Drum quantity varies according to drum diameter; 500mm diameter can load 32 drums
Dimension	12 × 2.2 × 2.54m
Total Power	Approximately 20kW
Power Supply	Three-phase four-wire 380V / 50Hz
Diesel Oil Burner Heat Value	720,000 kcal
Temperature Control	Diesel burner automatically starts and stops according to bitumen and thermal oil temperature settings
Liquid Level System	Liquid level alarm system included according to source configuration
Residue Handling	Filter device installed in the bitumen circulation tube for automatic slag removal

Power supply differences, drum specification, installation and debugging scope, and final supply details should be confirmed during RFQ.

Applications

Self-Contained Drum Bitumen Melting
Suitable for projects that need a self-heating drum bitumen decanter with built-in diesel burner heating instead of a separate thermal oil boiler.
Remote Asphalt Plant Support
Useful for asphalt plant support sites where compact integrated heating, drum bitumen decanting, and liquid bitumen pumping are required.
Road Construction Projects
Designed for road construction projects using drum-packed bitumen and requiring a compact melting system that is easier to transport and relocate.

RFQ Checklist

To recommend a suitable YDST Series configuration, please provide drum diameter, required melting capacity, fuel condition, power supply, site layout, storage tank distance, required pumping temperature, container shipping requirements, and whether installation or debugging service is required.

FAQ About YDST Self-Heating Drum Bitumen Decanter

What is the YDST Series Self-Heating Drum Bitumen Decanter used for?

YDST Series is used for melting and decanting drum-packed bitumen, then pumping the liquid bitumen to storage tanks, asphalt plant support systems, or road construction bitumen supply systems.

Does YDST Series require an external thermal oil boiler?

No. YDST Series is a self-heating integrated drum bitumen decanter. It combines the thermal oil boiler and decanter structure into one unit and uses a diesel oil burner as the heat source.

What is the production rate of YDST-10?

The YDST-10 source data lists a production rate of 8–10 t/h when the ambient temperature is above 25°C. Actual performance may vary according to drum size, bitumen condition, and site operation.

How many drums can YDST-10 load?

According to the source note, if the drum diameter is 500mm, the decanter can load 32 drums. Different drum diameters may affect the final drum quantity.

What heating method does YDST Series use?

YDST Series uses diesel burner heating, hot air heating, thermal oil coils, built-in heating furnace, and flue heat reuse for integrated drum bitumen melting.

Does the equipment include automatic temperature control?

Yes. The diesel burner automatically starts and stops according to the set temperatures of bitumen and thermal oil.

Does YDST Series have slag removal?

The source note states that a filter device is installed in the bitumen circulation tube and can remove slag automatically.

What should be confirmed before ordering YDST Series?

Buyers should confirm drum diameter, required capacity, fuel availability, power supply, site layout, storage tank connection, shipping requirements, and whether installation and debugging support is required.

Country/region

Language

YDST Series Bitumen Decanting Machine