Feiteng
Planta de emulsão betuminosa série GRL
Planta de emulsão betuminosa série GRL
Formulário de contato
A série GRL é a linha de produção de emulsão asfáltica da Feiteng voltada à precisão. Seu moinho coloidal de alta precisão proporciona uma produção de emulsão estável e uniforme para grandes projetos rodoviários.
- Modelo: Série GRL
- Capacidade de produção: 6 t/h ~ 12 t/h
- Finura da emulsão: 1μm ~ 5μm
- Sistema de controle: Dosagem automática por PLC para manter constante a proporção entre água, betume e emulsificante
- Aplicação: Tratamento de bases e superfícies rodoviárias, produção para pintura de ligação e imprimação, operação contínua em grande escala
Defina os requisitos da sua usina de emulsão
Informe a aplicação prevista da emulsão, as matérias-primas, a produção necessária e as utilidades disponíveis. Solicite uma configuração e um escopo de fornecimento adequados a esses dados.
- Confirme com a equipe do projeto as especificações dos materiais e os critérios de aceitação do produto.
- Defina a preparação das matérias-primas, o armazenamento do produto acabado e os requisitos de transferência.
- Pergunte quais tanques, bombas, controles e serviços de instalação estão incluídos ou excluídos.
Compare as opções de usinas de emulsão asfáltica. Envie seus requisitos de produção e do local para uma consulta baseada na configuração.
Compartilhar









GRL-6: 6 t/h Integrated Bitumen Emulsion Production
GRL-6 produces 6 t/h of standard or polymer-modified bitumen emulsion. Water heating, emulsifier dosing, bitumen and soap metering, colloid-mill shearing and the control system come pre-assembled in one 6.8 × 2.2 × 2.53 m board cabinet — one container to ship, one operator to run.
Why Contractors Choose GRL-6
-
Produção de 6 t/h, Um Operador
The full line is controlled from a single cabinet. One trained operator manages heating, dosing and output — no dedicated production crew needed.
-
Um Gabinete, Um Contêiner
All process units come pre-piped and pre-wired in a board cabinet that loads into a single container. Relocating between project sites takes days, not weeks.
-
Emulsão padrão + modificada
The high-speed colloid mill produces both standard and polymer-modified emulsion — tack coat, chip seal, micro-surfacing and cold-mix with one machine.
-
Aquecimento Preciso e de Baixo Consumo
Total installed power stays under 34 kW. Process water is heated indirectly by 200–250 °C thermal oil with temperature measurement accurate to within 1 °C — stable formulation, lower running cost.
Qual usina de emulsão da FEITENG se adapta ao seu projeto?
Choose GRL-6 for compact, mobile 6 t/h production with precision colloid milling. Need higher capacity? See the QRL Series (5–20 t/h, factory direct). Want capacity options in a simpler configuration? Compare the RL Series (RL-6 / RL-10).
Not sure which fits? Send us your target output and emulsion formulation — our engineers will recommend the right configuration within 24 hours.
Etapa 1 — Aquecimento de água e betume
Levar a água e o betume à temperatura de processo
Thermal oil at 200–250 °C heats the 3 m³ water tank indirectly, while heat-traced pipelines keep liquid bitumen at working temperature. Indirect heating avoids local overheating — this matters because overheated water or bitumen degrades the emulsifier and destabilises the final emulsion. Temperature measurement stays accurate to within 1 °C, so the formulation you set is the formulation you get.
Etapa 2 — Preparação da solução de sabão
Mix emulsifier solution in twin dosing tanks
Emulsifier solution is prepared in two 1.4 m³ dosing tanks working alternately: one tank feeds production while the other mixes the next batch, so the colloid mill never waits for soap. Switching between tanks follows a simple valve sequence operated from the control cabinet — continuous output without a second operator.
Etapa 3 — Medição
Meter bitumen and soap into the colloid mill
The variable-speed bitumen pump and soap flow control valve hold your target ratio precisely. The panel displays pump speed in Hz — at 6 m³/h output with 50% bitumen content the reference setting is about 360 rpm / 19 Hz — and the glass rotor flow meter lets the operator verify soap flow at a glance. Accurate metering is what keeps bitumen content consistent from the first tonne to the last.
Step 4 — Colloid Mill Shearing
Shear the mix into fine, stable emulsion
Inside the colloid mill, high-speed shearing disperses bitumen into the aqueous phase as fine, uniform droplets. Droplet fineness determines how long the emulsion stays stable in storage and how evenly it sprays on the road — and the same mill handles both standard and polymer-modified formulations without hardware changes.
Etapa 5 — Resfriamento e descarga
Resfriar e descarregar a emulsão acabada
Finished emulsion passes through the heat exchanger for controlled cooling, then discharges to your finished-product tank or directly to distributor trucks. If bitumen ever blocks the exchanger, the built-in reverse-heating cleaning mode clears it without disassembly — hours of downtime instead of days.
Componentes principais
-
Tanque de aquecimento de água
3 m³ tank heated by thermal oil, supplying process water for emulsifier solution preparation.
-
Tanques de solução de sabão gêmeos
Two 1.4 m³ dosing tanks working alternately for continuous emulsifier supply during production.
-
Bomba de Betume
Bomba de velocidade variável com display de velocidade no painel para dosagem precisa de betume no moinho.
-
Bomba de sabonete
8 m³/h pump with flow control valve and rotor flow meter for accurate soap solution dosing.
-
Colloid Mill
Core high-speed shearing component forming fine, stable standard or modified bitumen emulsion.
-
Trocador de calor
Realiza a troca térmica do processo; um modo de limpeza por aquecimento reverso desobstrui bloqueios de betume sem desmontagem.
-
Thermal Oil Heating / Heat Tracing
200–250 °C thermal oil heats process water indirectly and heat-traces the bitumen pipelines.
-
Armário de controle
Controle centralizado de motores, velocidade da bomba, temperaturas e sequência de produção — operado por um único operador.
Key Technical Parameters
Core specifications of the GRL-6 bitumen emulsion plant.
| Item | Specification |
|---|---|
| Model | GRL-6 |
| Product Type | Bitumen emulsion plant |
| Main Function | Standard bitumen emulsion and modified bitumen emulsion production |
| Production Capacity | 6 t/h |
| Overall Size | 6.8 × 2.2 × 2.53 m, board-cabinet design |
| Water Tank Capacity | 3 m³ |
| Emulsion / Dosing Tank Capacity | 1.4 m³ each tank |
| Total Installed Power | Less than 34 kW |
| Power Requirement | 380 V / 50 Hz regulated AC power, copper core cable section >25 mm² |
| Heating Method for Water | Thermal oil heating (indirect) |
| Working Temperature of Thermal Oil | 200–250 °C |
| Thermal Oil Capacity | 0.08 m³ (0.11 m³ including pipelines, ≈85 kg) |
| Temperature Measuring Error | Less than 1 °C |
| Bitumen Pump Reference Speed | About 360 rpm / 19 Hz at 6 m³/h output with 50% bitumen content |
| Soap Pump Flow | 8 m³/h pump capacity; e.g. 3 m³/h at 50% bitumen content |
Voltage, external pipelines, valves and accessory requirements are confirmed with your quotation.
Aplicações
-
Empreiteiros de manutenção de estradas
Produce tack coat, fog seal and chip-seal emulsion at your own site, on your own schedule, instead of buying finished emulsion at market price.
-
Plantas de fornecimento de emulsão
A compact line for regional plants supplying emulsion to multiple road projects — quick to install, simple to staff, easy to relocate.
-
Projetos de Emulsão Modificada
Produce polymer-modified emulsion for micro-surfacing and high-spec surface treatments with the same machine.
Construído pela FEITENG — 15+ anos de exportação de equipamentos de betume
GRL-6 is manufactured in our Dezhou factory alongside the bitumen equipment we have delivered to the UK, Zimbabwe, Mongolia, Uganda, the Maldives and more — including storage tanks supplied to the Wirtgen Group. Every unit ships with a one-year quality warranty, online commissioning support, and engineer dispatch on request.
Read the case: complete emulsifying and diluting equipment delivered to Zimbabwe →
Lista de verificação de RFQ
For an exact GRL-6 quotation, tell us: target emulsion output, bitumen content and formulation, available thermal-oil or heating supply, power supply, finished-product storage method, installation space, and destination port.
GRL-6 FAQ
What is GRL-6 used for?
GRL-6 produces standard and polymer-modified bitumen emulsion for road construction and maintenance — tack coat, chip seal, micro-surfacing and cold-mix applications.
Qual é a capacidade de produção?
6 t/h of finished emulsion. If you need 5–20 t/h factory-scale production, see the QRL Series emulsion plant.
What heating method does GRL-6 use?
Process water is heated indirectly by thermal oil at a working temperature of 200–250 °C, and bitumen pipelines are heat-traced with thermal oil — gentle, stable heating that protects the emulsifier.
A máquina é adequada para projetos móveis?
Yes. The complete line is pre-assembled in a 6.8 × 2.2 × 2.53 m board cabinet that ships as one container-sized module and relocates between sites with minimal re-installation.
Quais são as condições de pagamento?
Usually T/T: 30% down payment, balance before delivery. L/C is also accepted. Trade terms: EXW, FOB, CFR and CIF.
Qual é o prazo de entrega?
About 20 days of production time after the down payment is received.
What warranty and after-sales support do you provide?
One-year quality warranty after delivery, with online support included. We can also dispatch engineers to your site for installation, commissioning and operator training.
O preço inclui instalação e comissionamento?
Installation and commissioning are quoted separately. Most customers complete installation with our online guidance; on-site engineer service is available on request.
O que devo confirmar antes de fazer o pedido?
Target output, emulsion formulation and bitumen content, power supply, site layout, finished-product storage, and destination port. Send these with your inquiry for an exact quotation.
Get a GRL-6 Quotation Within 24 Hours
Categorias de Produtos Relacionados
-
Planta de emulsão betuminosa
A Feiteng fornece usinas de emulsão betuminosa e equipamentos de asfalto emulsionado...
-
Tanque de armazenamento de betume
Conheça os tanques de betume e sistemas de armazenamento de asfalto Feiteng...
-
Peças e Serviços
A Feiteng fornece equipamentos auxiliares, equipamentos de manutenção de estradas e suporte...