Pular para as informações do produto
1 de 9

Feiteng

Central de Produção de Asfalto Diluído XLS-5 | Máquina de Diluição de Alta Eficiência

Central de Produção de Asfalto Diluído XLS-5 | Máquina de Diluição de Alta Eficiência

Formulário de contato

A Usina de Produção de Asfalto Diluído XLS-5 é uma solução de alta precisão e eficiência energética, projetada para a mistura contínua e uniforme de asfalto com diluentes como querosene ou parafina. Apresentando tecnologia avançada de mistura de alto cisalhamento, esta usina é projetada para atender às rigorosas demandas da construção de estradas modernas, pavimentação de aeroportos e projetos de manutenção.

 

Complete a sua solução para construção de estradas:

Ver informações completas

XLS-5: Produce Cutback Bitumen On Site at 5 t/h

XLS-5 blends heated base bitumen with paraffin or another approved diluent at a metered ratio, producing prime-coat and cutback bitumen continuously at 5 t/h. Flowmeters and frequency converters hold the formula, a grinding mill homogenizes the blend, and the whole plant fits in a 2.6 × 1.1 × 1.5 m footprint — small enough to slot beside your existing tank farm.

  • Mix Your Own Prime Coat

    Producing cutback on site at 5 t/h means the formula, the schedule and the cost are yours — no waiting on outside suppliers for prime-coat material.

  • Proporções medidas e repetíveis

    Separate bitumen (4 m³/h) and paraffin (3.3 m³/h) pumps with flowmeters and frequency-converter speed control hold your target ratio batch after batch.

  • Homogeneizado por moinho de moagem

    The grinding mill blends bitumen and diluent into a uniform product — no stratified batches, consistent spray behavior on the road.

  • Área do tamanho de uma mesa

    At 2.6 × 1.1 × 1.5 m and under 26.5 kW, XLS-5 installs next to your tanks in days — the smallest production unit in the Feiteng lineup.

Complete Your Cutback Production Line

XLS-5 is the production unit — pair it with the XLC-15000 cutback finished product tank for heated storage of the finished material, and a base bitumen storage tank feeding the line. Producing emulsion rather than cutback? See the GRL-6 emulsion plant and QRL Series (5–20 t/h).

Send us your diluent type, target ratio and output — our engineers will configure the complete line within 24 hours.

Sistema de diluição de alta eficiência asfalto - Feiteng - Sistema de diluição de alta eficiência asfalto -

Etapa 1 — Preparação do betume base

Aquecer o betume base até a temperatura de produção

Base bitumen is held at process temperature in your storage tank, while the thermal-oil heat-tracing line (200–250 °C oil) keeps the supply pipeline warm. Pre-warmed lines mean production starts the moment you open the valves — no clearing solidified bitumen first.

Sistema de diluição de alta eficiência asfalto - Feiteng - Sistema de diluição de alta eficiência asfalto -

Etapa 2 — Verificação do diluente

Confirmar o fornecimento de parafina e a prontidão da tubulação

Operators verify diluent reserves and the paraffin filter before opening production valves. The filter protects the mill and flowmeters from impurities — a small check that prevents the most common cause of ratio drift.

Sistema de diluição de alta eficiência asfalto - Feiteng - Sistema de diluição de alta eficiência asfalto -

Etapa 3 — Partida sequencial

Ligue o moinho, a bomba de parafina e a bomba de betume em sequência

The fixed start-up sequence — mill first, then pumps — ensures the mill is never fed while stationary and the blend forms as a controlled flow from the first second. The sequence takes minutes and requires one operator.

Sistema de diluição de alta eficiência asfalto - Feiteng - Sistema de diluição de alta eficiência asfalto -

Etapa 4 — Controle de proporção

Ajustar a fórmula-alvo nos medidores de vazão

Bitumen and paraffin flows are adjusted via flowmeters and frequency converters until the target ratio holds steady. Because both streams are metered independently, changing the formula for a different cutback grade is a control adjustment — not a hardware change.

Sistema de diluição de alta eficiência asfalto - Feiteng - Sistema de diluição de alta eficiência asfalto -

Etapa 5 — Lavagem e desligamento

Lavar o moinho com parafina antes de parar

A 10–20 second paraffin flush clears the grinding mill and pipeline before shutdown, so no bitumen residue hardens inside overnight. Tomorrow's start-up is as clean as today's — this small routine is what keeps maintenance minimal.

  • Fornecimento de parafina + Filtro

    1.5 kW pump at 3.3 m³/h with in-line filter protecting the mill and meters from impurities.

  • Tubulação de fornecimento de betume

    3 kW pump at 4 m³/h transfers heated base bitumen from your storage tank to the mixing section.

  • Thermal-Oil Heat Tracing

    Mantém a tubulação de betume e as seções do processo na temperatura de trabalho durante toda a produção.

  • Moinho de moagem

    Homogenizes bitumen and diluent into a uniform cutback product — no stratification in storage.

  • Medidores de vazão + conversores de frequência

    Dosagem independente dos dois fluxos com controle de velocidade da bomba — o coração da precisão da proporção.

  • Saída de produto acabado

    Transfers finished cutback to the XLC-15000 finished product tank or your loading system.

Key Technical Parameters

ItemSpecification
ModelXLS-5
Equipment TypeBitumen cutback production plant
Main FunctionRatio-controlled mixing of bitumen with paraffin / approved diluent
Output5 t/h
Paraffin Pump3.3 m³/h, 1.5 kW
Bitumen Pump4 m³/h, 3 kW
Overall Dimension2.6 × 1.1 × 1.5 m
Total Power<26.5 kW, 380 V / 50 Hz (copper cable >25 mm²)
Thermal Oil Temperature200–250 °C
Process ControlFlowmeters, flow totalizer and frequency converters
Matched Finished Product TankXLC-15000 cutback finished product tank

Final configuration, safety requirements, local power supply, pipeline layout and installation scope are confirmed with your quotation.

  • Cutback Bitumen Production

    Produce MC/SC-type cutback grades on site with a controlled, documented ratio for every batch.

  • Prime Coat Preparation

    Road projects that consume prime-coat material daily save the supplier premium by mixing it themselves.

  • Produção em Lote para Armazenamento

    Execute os lotes conforme seu cronograma e transfira o produto acabado para um tanque aquecido para uso ao longo da semana.

Construído pela FEITENG — 15+ anos de exportação de equipamentos de betume

Feiteng emulsifying and diluting equipment has been delivered to Zimbabwe, the UK, Mongolia, Uganda and more — alongside storage tanks supplied to the Wirtgen Group. Every unit ships with a one-year quality warranty, online commissioning support, and engineer dispatch on request.

Read the case: complete emulsifying and diluting equipment delivered to Zimbabwe →

Lista de verificação de RFQ

For an exact XLS-5 quotation, tell us: target cutback output, bitumen grade, diluent type and ratio, base bitumen storage temperature, thermal-oil supply, power supply, finished product tank requirement, pipeline layout, safety requirements, and destination port.

XLS-5 FAQ

What is XLS-5 used for?

Producing cutback bitumen and prime-coat material by mixing heated base bitumen with paraffin or another approved diluent at a metered ratio — 5 t/h output.

O sistema requer betume aquecido?

Yes. Base bitumen must be at production temperature and the supply pipeline preheated — the built-in thermal-oil heat tracing handles the pipeline side.

Can I change the cutback formula?

Yes. Both streams are independently metered, so switching grades is a flowmeter and pump-speed adjustment, not a hardware change.

Preciso de um tanque de produto acabado?

Most projects pair XLS-5 with the XLC-15000 heated finished product tank so batches can be produced ahead of use. Tell us your storage need and we quote the line together.

Quais são as condições de pagamento?

Usually T/T: 30% down payment, balance before delivery. L/C is also accepted. Trade terms: EXW, FOB, CFR and CIF.

Qual é o prazo de entrega?

About 20 days of production time after the down payment is received.

What warranty and after-sales support do you provide?

One-year quality warranty after delivery, with online support included. We can also dispatch engineers for installation, commissioning and operator training.

Get an XLS-5 Quotation Within 24 Hours