Feiteng
XLS-5 बिटुमेन कटबैक उत्पादन संयंत्र | उच्च दक्षता तनुकरण मशीन
XLS-5 बिटुमेन कटबैक उत्पादन संयंत्र | उच्च दक्षता तनुकरण मशीन
संपर्क करें प्रपत्र
The XLS-5 बिटुमेन कटबैक उत्पादन संयंत्र एक उच्च परिशुद्धता, ऊर्जा-कुशल समाधान है जिसे केरोसिन या पैराफिन जैसे मंदक के साथ बिटुमेन के निरंतर और समान मिश्रण के लिए डिज़ाइन किया गया है। उन्नत हाई-शियर मिक्सिंग तकनीक से युक्त, इस संयंत्र को आधुनिक सड़क निर्माण, हवाई अड्डे के पक्कीकरण और रखरखाव परियोजनाओं की कठोर मांगों को पूरा करने के लिए इंजीनियर किया गया है।
अपना सड़क निर्माण समाधान पूरा करें:
- हमारा अन्वेषण करें बिटुमेन पिघलने के उपकरण
- हमारा अन्वेषण करें डामर भंडारण टैंक
शेयर करना









XLS-5: Produce Cutback Bitumen On Site at 5 t/h
XLS-5 blends heated base bitumen with paraffin or another approved diluent at a metered ratio, producing prime-coat and cutback bitumen continuously at 5 t/h. Flowmeters and frequency converters hold the formula, a grinding mill homogenizes the blend, and the whole plant fits in a 2.6 × 1.1 × 1.5 m footprint — small enough to slot beside your existing tank farm.
Why Contractors Choose XLS-5
-
Mix Your Own Prime Coat
Producing cutback on site at 5 t/h means the formula, the schedule and the cost are yours — no waiting on outside suppliers for prime-coat material.
-
मापे गए, दोहराने योग्य अनुपात
Separate bitumen (4 m³/h) and paraffin (3.3 m³/h) pumps with flowmeters and frequency-converter speed control hold your target ratio batch after batch.
-
ग्राउंड मिल से समांगीकृत
The grinding mill blends bitumen and diluent into a uniform product — no stratified batches, consistent spray behavior on the road.
-
डेस्क आकार का फ़ुटप्रिंट
At 2.6 × 1.1 × 1.5 m and under 26.5 kW, XLS-5 installs next to your tanks in days — the smallest production unit in the Feiteng lineup.
Complete Your Cutback Production Line
XLS-5 is the production unit — pair it with the XLC-15000 cutback finished product tank for heated storage of the finished material, and a base bitumen storage tank feeding the line. Producing emulsion rather than cutback? See the GRL-6 emulsion plant and QRL Series (5–20 t/h).
Send us your diluent type, target ratio and output — our engineers will configure the complete line within 24 hours.
चरण 1 — आधार बिटुमेन तैयारी
आधार बिटुमेन को उत्पादन तापमान तक गर्म करें
Base bitumen is held at process temperature in your storage tank, while the thermal-oil heat-tracing line (200–250 °C oil) keeps the supply pipeline warm. Pre-warmed lines mean production starts the moment you open the valves — no clearing solidified bitumen first.
चरण 2 — तनुकारक जाँच
पैराफिन आपूर्ति और पाइपलाइन तत्परता की पुष्टि करें
Operators verify diluent reserves and the paraffin filter before opening production valves. The filter protects the mill and flowmeters from impurities — a small check that prevents the most common cause of ratio drift.
चरण 3 — क्रमिक प्रारंभ
मिल, पैराफिन पंप और बिटुमेन पंप को क्रम से चालू करें
The fixed start-up sequence — mill first, then pumps — ensures the mill is never fed while stationary and the blend forms as a controlled flow from the first second. The sequence takes minutes and requires one operator.
चरण 4 — अनुपात नियंत्रण
फ्लोमीटर पर लक्ष्य फ़ॉर्मूला सेट करें
Bitumen and paraffin flows are adjusted via flowmeters and frequency converters until the target ratio holds steady. Because both streams are metered independently, changing the formula for a different cutback grade is a control adjustment — not a hardware change.
चरण 5 — धुलाई और शटडाउन
रोकने से पहले मिल को पैराफ़िन से फ़्लश करें
A 10–20 second paraffin flush clears the grinding mill and pipeline before shutdown, so no bitumen residue hardens inside overnight. Tomorrow's start-up is as clean as today's — this small routine is what keeps maintenance minimal.
मुख्य घटक
-
पैराफ़िन आपूर्ति + फ़िल्टर
1.5 kW pump at 3.3 m³/h with in-line filter protecting the mill and meters from impurities.
-
बिटुमेन आपूर्ति पाइपलाइन
3 kW pump at 4 m³/h transfers heated base bitumen from your storage tank to the mixing section.
-
Thermal-Oil Heat Tracing
उत्पादन के दौरान बिटुमेन पाइपलाइन और प्रक्रिया खंडों को कार्य तापमान पर बनाए रखता है।
-
ग्राइंडिंग मिल
Homogenizes bitumen and diluent into a uniform cutback product — no stratification in storage.
-
फ्लोमीटर + फ्रीक्वेंसी कन्वर्टर
पंप गति नियंत्रण के साथ दोनों धाराओं की स्वतंत्र मीटरिंग — अनुपात सटीकता का केंद्र।
-
तैयार उत्पाद आउटपुट
Transfers finished cutback to the XLC-15000 finished product tank or your loading system.
Key Technical Parameters
| Item | Specification |
|---|---|
| Model | XLS-5 |
| Equipment Type | Bitumen cutback production plant |
| Main Function | Ratio-controlled mixing of bitumen with paraffin / approved diluent |
| Output | 5 t/h |
| Paraffin Pump | 3.3 m³/h, 1.5 kW |
| Bitumen Pump | 4 m³/h, 3 kW |
| Overall Dimension | 2.6 × 1.1 × 1.5 m |
| Total Power | <26.5 kW, 380 V / 50 Hz (copper cable >25 mm²) |
| Thermal Oil Temperature | 200–250 °C |
| Process Control | Flowmeters, flow totalizer and frequency converters |
| Matched Finished Product Tank | XLC-15000 cutback finished product tank |
Final configuration, safety requirements, local power supply, pipeline layout and installation scope are confirmed with your quotation.
अनुप्रयोग
-
Cutback Bitumen Production
Produce MC/SC-type cutback grades on site with a controlled, documented ratio for every batch.
-
Prime Coat Preparation
Road projects that consume prime-coat material daily save the supplier premium by mixing it themselves.
-
बैच उत्पादन से भंडारण तक
अपनी समय-सारणी पर बैच चलाएँ और सप्ताह भर उपयोग के लिए तैयार उत्पाद को गर्म टैंक में स्थानांतरित करें।
FEITENG द्वारा निर्मित — बिटुमेन उपकरण निर्यात के 15+ Years
Feiteng emulsifying and diluting equipment has been delivered to Zimbabwe, the UK, Mongolia, Uganda and more — alongside storage tanks supplied to the Wirtgen Group. Every unit ships with a one-year quality warranty, online commissioning support, and engineer dispatch on request.
Read the case: complete emulsifying and diluting equipment delivered to Zimbabwe →
RFQ चेकलिस्ट
For an exact XLS-5 quotation, tell us: target cutback output, bitumen grade, diluent type and ratio, base bitumen storage temperature, thermal-oil supply, power supply, finished product tank requirement, pipeline layout, safety requirements, and destination port.
XLS-5 FAQ
What is XLS-5 used for?
Producing cutback bitumen and prime-coat material by mixing heated base bitumen with paraffin or another approved diluent at a metered ratio — 5 t/h output.
क्या सिस्टम को गर्म बिटुमेन की आवश्यकता है?
Yes. Base bitumen must be at production temperature and the supply pipeline preheated — the built-in thermal-oil heat tracing handles the pipeline side.
Can I change the cutback formula?
Yes. Both streams are independently metered, so switching grades is a flowmeter and pump-speed adjustment, not a hardware change.
क्या मुझे तैयार उत्पाद टैंक की आवश्यकता है?
Most projects pair XLS-5 with the XLC-15000 heated finished product tank so batches can be produced ahead of use. Tell us your storage need and we quote the line together.
भुगतान की शर्तें क्या हैं?
Usually T/T: 30% down payment, balance before delivery. L/C is also accepted. Trade terms: EXW, FOB, CFR and CIF.
डिलीवरी का समय कितना है?
About 20 days of production time after the down payment is received.
What warranty and after-sales support do you provide?
One-year quality warranty after delivery, with online support included. We can also dispatch engineers for installation, commissioning and operator training.
Get an XLS-5 Quotation Within 24 Hours
संबंधित उत्पाद श्रेणियाँ
-
बिटुमेन इमल्शन प्लांट
Feiteng टैक कोट, प्राइम कोट, स्लरी सील, माइक्रोसरफेसिंग, कोल्ड मिक्स और सड़क...
-
बिटुमेन भंडारण टैंक
सड़क निर्माण, डामर संयंत्रों और टर्मिनलों के लिए Feiteng के बिटुमेन भंडारण...
-
पार्ट्स और सेवाएँ
Feiteng बिटुमेन भंडारण, हीटिंग, पिघलने, छिड़काव, इमल्शन और संशोधित बिटुमेन सिस्टम के...