Pular para as informações do produto
1 de 9

Feiteng

Equipamento de fusão de betume DLT (sem queimador)

Equipamento de fusão de betume DLT (sem queimador)

Thermal-Oil Heated Drum Bitumen Decanter Without Built-in Burner

Formulário de contato

Apresentamos nosso Derretedor de Betume Série DLT, utilizando óleo térmico para aquecimento preciso. Este equipamento garante qualidade de aquecimento superior com alta eficiência, descarga rápida e operação amigável. Ele otimiza a produção, minimizando o desperdício e a poluição de betume. Seu design elegante, layout compacto e desempenho confiável o tornam ideal para a remoção de tambores de betume em diversos ambientes de trabalho. Atualize para o nosso decantador de betume avançado hoje para maior eficiência.

Complete Sua Solução de Construção Rodoviária:

Ver informações completas

DLT-10: The Economical Drum Decanter for Sites With a Thermal Oil Boiler

DLT-10 decants, melts, heats and pumps drum-packed bitumen continuously at 8–10 t/h, using hot thermal oil from your external boiler as the heating source. Because there is no built-in burner, it is the most economical drum decanter in the Feiteng lineup — the right choice when your asphalt plant or site already runs a centralized thermal oil heating system.

  • Lower Cost, No Burner to Maintain

    Using your existing thermal oil boiler (800,000 kcal reference capacity) removes the built-in heating system from the price — and from your maintenance list.

  • Continuous 8–10 t/h Decanting

    32 drums per load move through the heating chamber on a hydraulic propulsion system, melting into a 20 m³ lower tank for uninterrupted pumping.

  • Um contêiner de 40 HQ, 17 kW

    The 12 × 2.2 × 2.55 m unit loads into a single 40 HQ container and runs on approximately 17 kW — low freight cost, low power demand.

Which Feiteng Drum Decanter Fits Your Site?

Choose DLT when you already have a thermal oil boiler and want the most economical configuration. Want automatic drum loading? See the ZDLT Series. No boiler on site? The self-heating YDST Series has a built-in diesel burner. Melting bag-packed bitumen? See the DKLR and YDLR bag decanters.

Send us your bitumen package type, capacity and heating condition — our engineers will recommend the right configuration within 24 hours.

DLT Series Bitumen Melting Equipment (With Out Burner) - Feiteng - DLT Series Bitumen Melting Equipment (With Out Burner) - Feiteng -  -

Passo 1 — Alimentação do tambor

Feed opened drums into the decanter

Opened drums are placed onto the feeding rack by the drum lifting system. Feeding runs in parallel with melting — while one batch is heated inside the chamber, the next batch is being loaded. This overlap is what keeps DLT-10 output continuous at 8–10 t/h rather than batch-by-batch, so your downstream plant never waits for bitumen.

Máquina de decantação de betume da série YDST - Feiteng - Máquina de decantação de betume da série YDST - Feiteng - -

Passo 2 — Aquecimento da Câmara

Mova os tambores pela câmara de aquecimento superior

The hydraulic propulsion system advances drum plates step by step through the upper heating chamber, where thermal oil coils wrap each drum in even, indirect heat. The gradual advance gives every drum a complete heating cycle — bitumen releases cleanly from the drum walls and empty drums exit with minimal residue, which means less wasted bitumen per drum.

DLT Series Bitumen Melting Equipment (With Out Burner) - Feiteng - DLT Series Bitumen Melting Equipment (With Out Burner) - Feiteng -  -

Passo 3 — Piscina de Fusão

Funda o betume na câmara inferior

Released bitumen drops into the 20 m³ lower chamber, which works as both melting pool and buffer storage. Thermal oil coils hold the pool at a stable temperature, so the downstream pump always receives bitumen in a consistent, pumpable state — even if drum feeding pauses for a shift change or reload.

DLT Series Bitumen Melting Equipment (With Out Burner) - Feiteng - DLT Series Bitumen Melting Equipment (With Out Burner) - Feiteng -  -

Etapa 4 — Filtragem e bombeamento

Bombear para um tanque de armazenamento

At pumping temperature, bitumen passes the in-line slag filter, which automatically traps drum debris and impurities. The bitumen pump then transfers clean liquid bitumen to your storage tank or asphalt plant — protecting downstream pumps, valves and spray equipment from blockage and cutting maintenance stops.

  • Tanque de Fusão (20 m³)

    Stores and heats bitumen during decanting and melting, supporting continuous liquid bitumen supply.

  • Sistema de Aquecimento a Óleo Térmico

    Transfers heat from your external boiler to the upper heating chamber and lower melting chamber.

  • Hydraulic Propulsion System

    Empurra as placas dos tambores através da câmara de aquecimento para alimentação contínua de tambores durante a operação.

  • Dispositivo Basculante de Tambores

    Supports drum handling and decanting, improving bitumen removal and reducing manual handling.

  • Bomba e Filtro de Betume

    The pump transfers melted bitumen while the in-line filter removes slag and impurities from the circulation pipeline.

  • Sistema de controle elétrico

    Controls the operating sequence, hydraulic propulsion, heating and pumping — approximately 17 kW total power.

Key Technical Parameters

Core specifications of the DLT-10 drum bitumen decanter without burner.

ParameterSpecification
ModelDLT-10
Equipment TypeDrum bitumen decanter without built-in burner
Heating SourceExternal thermal oil boiler required
Production8–10 t/h
Applicable ConditionBitumen softening point ≤55 °C; average ambient temperature ≥25 °C
Tank Volume20 m³
Drum Quantity32 drums at 500 mm drum diameter
Dimension12 × 2.2 × 2.55 m
Container LoadingLoads into 1 × 40 HQ container
Total PowerApproximately 17 kW
Thermal Oil Boiler Capacity Needed800,000 kcal

DLT-10 has no built-in burner — pair it with an external thermal oil boiler or your existing hot oil system. Final specifications are confirmed with your quotation.

  • Sistemas de fornecimento de betume em tambores

    Decanta, funde e bombeia continuamente o betume fornecido em tambores antes do uso em projetos rodoviários.

  • Preparação de Betume para Usina de Asfalto

    Prepara betume líquido antes das usinas de mistura asfáltica ou dos tanques de armazenamento, com filtragem automática de escória.

  • Locais com sistemas centrais de óleo quente

    Ideal where a thermal oil boiler already serves storage tanks and pipelines — one heat source for the whole bitumen system.

  • Caldeira de Óleo Térmico

    Required external heat source for DLT-10 — reference capacity 800,000 kcal. Feiteng supplies matched boilers.

    View Thermal Oil Boiler 
  • Tanque de armazenamento de betume

    Stores melted bitumen after decanting and holds working temperature for plant feeding or project use.

    Visualizar Tanque de Armazenamento de Betume 
  • Máquina de Fusão de Betume em Sacos

    Compare os sistemas de fusão da FEITENG para diferentes formatos de embalagem de betume, incluindo betume em tambores e em sacos.

    Ver derretedor de betume em sacos 

Construído pela FEITENG — 15+ anos de exportação de equipamentos de betume

Feiteng melting equipment has been delivered to Taiwan, the Maldives, Mongolia, Uganda and more — alongside storage tanks supplied to the Wirtgen Group. Every unit ships with a one-year quality warranty, online commissioning support, and engineer dispatch on request.

Bitumen melting equipment delivered to Taiwan →
Bitumen melting system delivered to the Maldives →

Lista de verificação de RFQ

For an exact DLT-10 quotation, tell us: required decanting capacity, drum diameter, bitumen softening point, ambient temperature, available thermal oil boiler capacity and working temperature, power supply, downstream storage volume, site layout, container shipping requirements, destination port and project timeline.

FAQ DLT-10

What is the DLT-10 used for?

Continuous drum bitumen decanting, melting, heating and pumping before transfer to storage tanks, asphalt plants or downstream bitumen equipment.

Does the DLT-10 include a built-in burner?

No. DLT-10 uses hot thermal oil from an external boiler — that is why it costs less than self-heating models. If you need built-in heating, see the YDST Series.

What production capacity does DLT-10 support?

8–10 t/h when the bitumen softening point is ≤55 °C and average ambient temperature is ≥25 °C.

How many drums can the DLT-10 handle?

32 drums per load at 500 mm drum diameter. Tell us your drum spec for an exact loading figure.

Quais são as condições de pagamento?

Usually T/T: 30% down payment, balance before delivery. L/C is also accepted. Trade terms: EXW, FOB, CFR and CIF.

Qual é o prazo de entrega?

About 20 days of production time after the down payment is received.

What warranty and after-sales support do you provide?

One-year quality warranty after delivery, with online support included. We can also dispatch engineers for installation, commissioning and operator training.

O que deve ser confirmado antes da cotação?

Capacity, drum diameter, bitumen softening point, external boiler capacity, voltage, site layout, downstream storage, container shipping requirement and destination port.

Get a DLT-10 Quotation Within 24 Hours