Feiteng
Tagħmir ta 'Produzzjoni ta' Asfalt tal-Gomma Serje DXL
Tagħmir ta 'Produzzjoni ta' Asfalt tal-Gomma Serje DXL
Formola ta' kuntatt
Gomma tat-tip DXL, tagħmir ta 'produzzjoni tal-bitum modifikat huwa tagħmir ta' produzzjoni ta 'lottijiet ta' asfalt b'ħafna funzjonijiet li jsaħħan waħdu ddisinjat mill-kumpanija tagħna. Dan it-tagħmir huwa adattat għall-preparazzjoni u l-produzzjoni, l-iżvilupp u l-ħażna ta 'kull tip ta' bitum modifikat trab tal-gomma u bitum modifikat SBS mingħajr bojler taż-żejt termali fuq il-post.
Imla s-Soluzzjoni Tiegħek tal-Kostruzzjoni tat-Toroq:
- Esplora Tagħmir għat-Tidwib tal-Bitum
- Esplora Tank tal-Ħżin tal-Asfalt
Aqsam









YDXL-28: Rubber Bitumen Production — 20 Tons Per 2-Hour Batch, No Boiler Needed
The DXL series self-heating unit (model YDXL-28) produces rubber and SBS modified bitumen at project sites with no external boiler: two Baltur diesel burners and thermal oil coils heat the 28 m³ tank at about 20 °C per hour, three variable-frequency agitators and a 45 kW colloid mill handle dispersion, and each batch delivers around 20 tons in roughly 2 hours. Pair it with the matched YDXL-28C storage tank for continuous supply.
Why Contractors Choose YDXL-28
-
20 t għal Kull Lott, ~2 Sigħat
Batch numbers you can plan a paving schedule around — two batches per shift keeps a rubber-asphalt paving train continuously supplied.
-
No External Boiler Needed
Twin Baltur diesel burners with thermal oil coils make the unit fully self-heating — deploy at remote road projects with nothing but diesel fuel.
-
Rubber and SBS in One Machine
The reserved feeding interface takes crumb rubber powder or SBS — switch formulations between projects without changing hardware.
-
Insulazzjoni ta' Grad Aeroġel
High-polymer aerogel plus rock wool insulation holds batch temperature between operations — less reheating diesel burned per ton produced.
Liema Sistema tal-Bitum Modifikat FEITENG Taqbel mal-Proġett Tiegħek?
Choose YDXL-28 for self-heating batch production of rubber or SBS bitumen at 20 t/batch — and pair it with the matched YDXL-28C rubber bitumen storage tank so production and paving run from separate vessels. Need continuous 15 t/h SBS production with PLC control? See the GLS-15 skid-mounted unit. Small-batch PMB production or storage? Compare the YZGL-L5 5 m³ PMB tank.
Send us your additive type, batch size and fuel condition — our engineers will recommend the right configuration within 24 hours.
Pass 1 — Injezzjoni tal-Bitum tal-Matriċi
Inject base bitumen into the 28 m³ tank
Base bitumen enters the production tank ahead of heating and additive feeding. The 28 m³ volume takes a full 20-ton batch with working headroom for agitation — one fill, one batch, no topping up mid-cycle.
Pass 2 — Tisħin Doppju
Heat with twin Baltur burners and thermal oil coils
Two Italian Baltur diesel burners drive flue heating for speed while thermal oil coils spread gentle, even heat — the tank climbs about 20 °C per hour without scorching bitumen at hot surfaces. The burners start and stop automatically at your set temperatures, interlocked with the oil circulation pump.
Pass 3 — Tmigħ tal-Addittiv
Feed rubber powder or SBS through the reserved interface
Crumb rubber or SBS enters through the dedicated feeding interface at the rate your formula requires. The same machine runs both additive families — useful when one season's contracts call for rubber asphalt and the next for SBS.
Pass 4 — Aġitazzjoni u Tħin
Disperse through agitators and the 45 kW colloid mill
Three 7.5 kW variable-frequency agitators keep the batch moving while the 45 kW colloid mill (10 m³/h) grinds additive into the bitumen matrix in circulation passes. Grinding fineness is what determines the elasticity and stability of the finished rubber bitumen — this loop is the heart of the machine.
Pass 5 — Trasferiment tal-Ħażna
Ippompja l-lott lest lejn it-tank tal-ħażna mqabbel
The YCB18/0.6 insulated gear pump (18 m³/h) transfers the finished batch to the matched YDXL-28C storage tank, freeing the production tank for the next batch. Production and paving draw from separate vessels — neither waits for the other.
Komponenti Prinċipali
-
28 m³ Production Tank
Ir-reċipjent ewlieni għat-tisħin, it-taħlit, iċ-ċirkolazzjoni tat-tħin u l-produzzjoni tal-lott — 12 × 2.26 × 2.55 m b'kollox.
-
Twin Baltur Diesel Burners
Italian-brand burners with automatic start-stop logic — the self-heating core of the system.
-
Thermal Oil Circulation
RY50-32 pump, 12 m³/h at 2.2 kW, distributing coil heat evenly (≈550 L oil charge).
-
Colloid Mill (45 kW)
10 m³/h grinding capacity — disperses rubber and SBS to the fineness modified bitumen specs demand.
-
Tliet Aġitaturi VF
7.5 kW each, variable-frequency — agitation energy matched to the formulation, not run flat out.
-
Pompa tal-Bitum Insulata
YCB18/0.6 gear pump, 18 m³/h at 11 kW, with DN65 connections and 25 mm sampling valve.
-
Insulazzjoni bl-Aeroġel + Suf tal-Blat
Insulazzjoni premium iżżomm it-temperatura tal-lott bejn l-operazzjonijiet, u tnaqqas il-fjuwil tat-tisħin mill-ġdid.
-
Sistema ta' Kontroll Elettriku
Burner logic, temperature instruments, pump and agitator control — ≈81.5 kW production unit, ≈36.5 kW storage tank.
Key Technical Parameters
Core specifications of the YDXL-28 rubber bitumen manufacturing machine and matched storage tank.
| Item | Specification |
|---|---|
| Model | YDXL-28S (production) / YDXL-28C (storage) |
| Product Type | Self-heating rubber bitumen manufacturing machine + matched storage tank |
| Heating Method | Twin diesel burner direct heating + thermal oil coils (double heating) |
| Tank Capacity | 28 m³ |
| Production Per Batch | ≈20 tons, about 2 hours per batch |
| Heating Rate | ≈20 °C/h whole tank |
| Diesel Burners | 2 × Italy Baltur, automatic start-stop |
| Colloid Mill | 10 m³/h, 45 kW |
| Agitators | 3 × 7.5 kW variable-frequency |
| Bitumen Pump | YCB18/0.6 insulated gear pump, 18 m³/h, 11 kW, DN65 |
| Thermal Oil Pump | RY50-32, 12 m³/h, 2.2 kW (≈550 L oil charge) |
| Sampling Valve | 25 mm high-temperature ball valve |
| Total Power | ≈81.5 kW (production) / ≈36.5 kW (storage tank) |
| Overall Dimensions | 12 × 2.26 × 2.55 m (shipping reference 12 × 2.31 × 2.53 m) |
| Insulation | High-polymer aerogel + rock wool |
External pipelines, valves and flanges are confirmed before supply — formulation, voltage and storage tank scope are finalized with your quotation.
Applikazzjonijiet
-
Proġetti tat-Toroq bl-Asfalt tal-Gomma
Produce crumb-rubber bitumen at the project site — no boiler infrastructure, no dependence on distant supply plants.
-
SBS Modified Bitumen Batches
Batch production, development and storage of SBS modified bitumen with the same machine.
-
Siti Mobbli u Remoti
Disinn li jissaħħan waħdu u dimensjonijiet kompatibbli mal-Kontenitur jippermettu t-tqegħid kull fejn ikun disponibbli d-diżil.
Mibni minn FEITENG — 15+ Sena ta' Esportazzjoni ta' Tagħmir tal-Bitumen
YDXL-28 is manufactured in our Dezhou factory alongside the bitumen equipment we have delivered to the UK, Zimbabwe, Mongolia, Uganda and the Wirtgen Group. Every unit ships with a one-year quality warranty, online commissioning support, and engineer dispatch on request.
Read the case: complete bitumen processing equipment delivered to Zimbabwe →
Lista ta' Kontroll tal-RFQ
For an exact YDXL-28 quotation, tell us: target batch output, rubber powder or SBS formulation, diesel supply condition, power supply, storage tank requirement, external pipeline scope, site layout, shipping destination, and installation constraints.
YDXL-28 FAQ
What is YDXL-28 used for?
Batch production of rubber (crumb rubber) and SBS modified bitumen at 20 tons per ≈2-hour batch, with development, storage and finished-product pumping — no external boiler required.
Liema metodu ta' tisħin tuża?
Double heating: two Baltur diesel burners drive direct flue heat while thermal oil coils heat indirectly — about 20 °C per hour for the whole tank, under automatic control.
Can it run both rubber powder and SBS?
Yes — the reserved feeding interface accepts both additive families, so one machine covers rubber asphalt and SBS contracts.
Does YDXL-28 include a storage tank?
A matched YDXL-28C rubber bitumen storage tank is available so production and paving run from separate vessels — tell us your storage need and we quote the pair together.
X'Inhuma t-termini ta' ħlas?
Usually T/T: 30% down payment, balance before delivery. L/C is also accepted. Trade terms: EXW, FOB, CFR and CIF.
Kemm idum iż-żmien tal-kunsinna?
About 20 days of production time after the down payment is received.
What warranty and after-sales support do you provide?
One-year quality warranty after delivery, with online support included. We can also dispatch engineers for installation, commissioning and operator training.
Get a YDXL-28 Quotation Within 24 Hours
Kategoriji Relatati tal-Prodotti
-
Tagħmir tal-Bitum Modifikat
Feiteng jipprovdi tagħmir tal-bitum modifikat għal bitum modifikat bil-polimeri, asfalt tal-gomma, bitum...
-
Tank tal-Ħżin tal-Bitum
Skopri t-tankijiet u s-sistemi Feiteng għall-ħażna tal-bitum u tal-asfalt għall-kostruzzjoni tat-toroq, impjanti...
-
Boiler taż-żejt termali
Feiteng jipprovdi bojlers taż-żejt termali u sistemi ta 'tisħin taż-żejt tat-trasferiment tas-sħana...