•
1 7

Feiteng

YDL-40F डीजल बर्नर डबल हीटिंग स्क्वायर बिटुमेन टैंक

YDL-40F डीजल बर्नर डबल हीटिंग स्क्वायर बिटुमेन टैंक

42m³ self-heating bitumen tank with diesel burner

YDL-40F डीजल बर्नर डबल हीटिंग स्क्वायर बिटुमेन टैंक एक 42m³ सेल्फ-हीटिंग बिटुमेन स्टोरेज टैंक है जिसे बेस बिटुमेन स्टोरेज, अनलोडिंग, आंतरिक परिसंचरण, बाहरी आपूर्ति और पाइपलाइन हीट ट्रेसिंग के लिए डिज़ाइन किया गया है।

  • मॉडल: YDL-40F
  • उत्पाद प्रकार: डीजल बर्नर बिटुमेन भंडारण टैंक
  • कुल मात्रा: 42m³
  • तापन विधि: डीज़ल प्रत्यक्ष ताप + तापीय तेल अप्रत्यक्ष ताप
  • मुख्य विन्यास: बाल्टूर डीजल बर्नर, दहन कक्ष, थर्मल ऑयल कॉइल्स, इंसुलेटेड बिटुमेन पंप, थर्मल ऑयल सर्कुलेशन पंप, तापमान नियंत्रण प्रणाली और लेवल गेज
  • मुख्य अनुप्रयोग: बिटुमेन भंडारण, हीटिंग, अनलोडिंग, आंतरिक परिसंचरण, बाहरी आपूर्ति, और पाइपलाइन हीट ट्रेसिंग
पूरा विवरण देखें

YDL-40F Diesel Burner Double Heating Square Bitumen Tank

YDL-40F Diesel Burner Double Heating Square Bitumen Tank is a 42m³ self-heating square bitumen storage tank designed for base bitumen storage, asphalt mixing plant supply, and bitumen process systems that require integrated heating, unloading, internal circulation, external supply, and pipeline heat tracing.

This product is not a drum bitumen decanter. It is a bitumen storage tank with diesel direct heating and thermal oil indirect heating. The tank integrates a diesel oil burner, built-in combustion chamber with thermal oil jacket, flue tubes, thermal oil heating coils, insulated bitumen pump, thermal oil circulation pump, expansion tank, temperature control system, level gauge, and unloading trough.

Why Choose YDL-40F

  • Double Heating Structure

    The tank combines diesel direct heating with thermal oil indirect heating. Flue tubes heat bitumen directly, while thermal oil coils support stable indirect heating and pipeline heat tracing.

  • Integrated Bitumen Storage and Heating

    YDL-40F combines bitumen storage, heating, internal circulation, unloading, and external supply in one square tank system, helping reduce separate equipment layout work.

  • Thermal Oil for Pipeline Heat Tracing

    The system can supply hot thermal oil for bitumen pump and pipeline preheating, helping reduce blockage risk during unloading, circulation, and external supply.

  • Container-Friendly Square Tank Layout

    The complete unit is designed with an integrated base and transportable dimensions. The source note states that the unit can be loaded into one 40HQ container.

Bitumen Receiving

Receive bitumen through the unloading trough and insulated pump

Base bitumen is received through the unloading trough and transferred by the insulated bitumen pump. The pump can support unloading, internal circulation, and external supply according to project operation needs.

Thermal Oil Circulation

Start thermal oil circulation before burner heating

The source note specifies that the thermal oil circulation pump should be started before burner heating. The burner and circulation pump have an interlock logic for safer heating operation.

Double Heating

Heat bitumen through flue tubes and thermal oil coils

The diesel burner heats the built-in combustion chamber and flue tube system, while thermal oil coils provide indirect heating. This double heating structure supports faster heating and stable temperature holding.

Automatic Temperature Control

Control bitumen and thermal oil temperatures automatically

The bitumen temperature and thermal oil temperature are controlled by automatic temperature controllers. Upper and lower temperature limits can be set to control burner start and stop.

Supply and Heat Tracing

Pump bitumen out and supply hot thermal oil for pipelines

After heating, bitumen can be internally circulated or supplied externally through the insulated bitumen pump. The tank can also provide hot thermal oil for bitumen pipeline heat tracing when required.

Main Components

  • Square Tank Body with Integrated Base

    The 42m³ square tank body uses an integrated base structure and is designed for bitumen storage, heating, circulation, unloading, and external supply.

  • Baltur Diesel Oil Burner

    The source configuration lists a Baltur TBL 60P imported Italian diesel burner for the self-heating system.

  • Combustion Chamber with Thermal Oil Jacket

    The combustion chamber is specified as 12mm, Φ530 × 2500mm, with a 70mm external thermal-oil jacket for integrated heat transfer.

  • Multirow Flue Tubes

    Φ159 seamless steel heating tubes are used for bitumen heating, helping transfer heat through the tank body during operation.

  • Thermal Oil Heating Coils

    Thermal oil coils provide indirect heating and support thermal oil circulation, temperature holding, and pipeline heat tracing functions.

  • Insulated Bitumen Pump

    The 3QGB80×2-36 insulated bitumen pump supports unloading, internal circulation, and external bitumen supply, with 16.8m³/h throughput.

  • Thermal Oil Circulation Pump

    The RY50-32-160 thermal oil circulation pump supports 12.5m³/h thermal oil circulation for heating and heat tracing.

  • Temperature Control and Level Gauge

    Automatic temperature controllers monitor bitumen and thermal oil temperatures, while a float level gauge with pointer display supports real-time level monitoring.

  • Insulation and Outer Cladding

    The tank uses 50mm rock wool insulation with 0.5mm corrugated white color steel sheet outer cladding to reduce heat loss.

Key Technical Parameters

The following parameters are organized from the supplied YDL-40F product note. Final power supply, heating requirement, pipeline heat tracing, and installation scope should be confirmed before quotation.

ItemSpecification
ModelYDL-40F
Product TypeDiesel burner double heating square bitumen storage tank
Heating MethodDiesel direct heating + thermal oil indirect heating
Heating Rate10–15°C/h at ambient temperature 25°C
Maximum Bitumen Temperature180°C
Total Volume42m³
Overall Dimensions12000 × 2260 × 2520mm, including accessory length
Base TypeIntegrated base
Bitumen Pump Throughput16.8m³/h
Total Installed Power8.35kW
Power Supply380V / 50Hz stable AC power
Thermal Oil Working Temperature200–240°C
Bitumen Temperature ControlAutomatic temperature controller
Thermal Oil Temperature ControlAutomatic temperature controller
Tank Body5mm steel plate; 10310 × 2100 × 2110mm
End Plate8mm steel plate
Combustion Chamber12mm; Φ530 × 2500mm; 70mm external thermal-oil jacket
Heating TubesΦ159 seamless steel pipe for bitumen heating
Diesel BurnerBaltur TBL 60P imported Italian burner
Bitumen Pump3QGB80×2-36 insulated bitumen pump; external supply, internal circulation and unloading
Bitumen Pump Motor5.5kW-6
Bitumen PipelineDN80 / DN65
Three-Way Plug ValveDN80 / DN65 for switching external supply and internal circulation
Thermal Oil Circulation PumpRY50-32-160; 12.5m³/h
Thermal Oil Pump Motor2.2kW-2
Tank Insulation50mm rock wool full tank insulation
Outer Cladding0.5mm corrugated white color steel sheet
Thermal Oil Heat-Tracing PipelineDN25 for bitumen pump and pipeline preheating
Temperature Controller Range-200°C to 450°C
Level GaugeFloat level gauge with pointer display
Electrical ComponentsSchneider components for power, display, control and monitoring
24-Hour Temperature DropNot more than 10% of the difference from ambient temperature
Container Loading1 × 40HQ container

The YDL-40F is a bitumen storage tank with integrated diesel burner heating and thermal-oil circulation. It is not a drum bitumen decanter or bitumen melting machine. Confirm power supply, unloading conditions, pipeline heat tracing, and downstream supply requirements before ordering.

Applications

  • Base Bitumen Storage for Asphalt Mixing Plants

    Suitable for asphalt mixing plant sites that need heated base bitumen storage, unloading, circulation, and external supply.

  • Bitumen Supply for Processing Systems

    Can supply heated bitumen for emulsion bitumen, modified bitumen, and rubber bitumen production systems according to project layout.

  • Sites Requiring Pipeline Heat Tracing

    Designed for projects that need integrated heating and hot thermal-oil supply for bitumen pump and pipeline preheating.

RFQ Checklist

To recommend a suitable YDL-40F configuration, please provide required storage capacity, bitumen type, unloading method, required heating rate, local power supply, fuel condition, downstream equipment connection, pipeline heat tracing requirements, container shipping limits, and site layout.

FAQ About YDL-40F Diesel Burner Bitumen Storage Tank

What is the YDL-40F Diesel Burner Double Heating Square Bitumen Tank used for?

YDL-40F is used for heated base bitumen storage, unloading, internal circulation, external supply, and hot thermal-oil supply for pipeline heat tracing at asphalt mixing plants or bitumen processing systems.

Is YDL-40F a drum bitumen decanter?

No. YDL-40F is a diesel burner bitumen storage tank. It is designed for bitumen storage and heating, not for drum bitumen decanting.

What is the tank volume of YDL-40F?

The source data lists a total volume of 42m³ for the YDL-40F square bitumen tank.

What heating method does YDL-40F use?

YDL-40F uses diesel direct heating and thermal oil indirect heating. The system includes a diesel burner, flue tubes, thermal oil heating coils, and thermal oil circulation.

What burner is used in the YDL-40F configuration?

The source configuration lists a Baltur TBL 60P imported Italian diesel burner.

Can YDL-40F preheat bitumen pipelines?

Yes. The source configuration includes a DN25 thermal oil heat-tracing pipeline for bitumen pump and pipeline preheating.

What is the bitumen pump capacity?

The 3QGB80×2-36 insulated bitumen pump is listed with 16.8m³/h throughput and is used for unloading, internal circulation, and external supply.

Can the YDL-40F be shipped by container?

The source note states that the complete YDL-40F unit can be loaded into one 40HQ container.

Request a YDL-40F Quotation

Related Product Categories