Feiteng
जीआरएल सीरीज बिटुमेन इमल्शन प्लांट
जीआरएल सीरीज बिटुमेन इमल्शन प्लांट
संपर्क करें प्रपत्र
GRL सीरीज Feiteng की सटीकता-केंद्रित बिटुमेन इमल्शन उत्पादन लाइन है। बड़े सड़क प्रोजेक्टों के लिए स्थिर और समान इमल्शन उत्पादन हेतु इसमें उच्च-सटीकता वाला कोलॉइड मिल लगा है।
- मॉडल: GRL सीरीज
- उत्पादन क्षमता: 6 t/h ~ 12 t/h
- इमल्शन की महीनता: 1μm ~ 5μm
- नियंत्रण प्रणाली: पानी, बिटुमेन और इमल्सीफायर का अनुपात एकसमान रखने के लिए PLC-आधारित स्वचालित डोजिंग
- उपयोग: राजमार्ग आधार और सतह उपचार, टैक कोट और प्राइम कोट के लिए उत्पादन तथा बड़े पैमाने पर निरंतर संचालन
इमल्शन संयंत्र की जरूरतें तय करें
इमल्शन का अपेक्षित उपयोग, कच्चा माल, आवश्यक उत्पादन दर और उपलब्ध सहायक सुविधाएं बताएं। इन जानकारियों के अनुरूप विन्यास और आपूर्ति का दायरा मांगें।
- प्रोजेक्ट टीम के साथ सामग्री की विशिष्टताओं और उत्पाद स्वीकृति मानदंडों की पुष्टि करें।
- कच्चे माल की तैयारी, तैयार उत्पाद के भंडारण और स्थानांतरण की जरूरतें तय करें।
- पूछें कि कौन से टैंक, पंप, नियंत्रण और स्थापना सेवाएं शामिल हैं या बाहर हैं।
तुलना के लिए देखें: बिटुमेन इमल्शन संयंत्र के विकल्प. अपनी उत्पादन और साइट की जरूरतें भेजें ताकि विन्यास-आधारित पूछताछ की जा सके।
शेयर करना









GRL-6: 6 t/h Integrated Bitumen Emulsion Production
GRL-6 produces 6 t/h of standard or polymer-modified bitumen emulsion. Water heating, emulsifier dosing, bitumen and soap metering, colloid-mill shearing and the control system come pre-assembled in one 6.8 × 2.2 × 2.53 m board cabinet — one container to ship, one operator to run.
Why Contractors Choose GRL-6
-
6 t/h Output, One Operator
The full line is controlled from a single cabinet. One trained operator manages heating, dosing and output — no dedicated production crew needed.
-
एक कैबिनेट, एक कंटेनर
All process units come pre-piped and pre-wired in a board cabinet that loads into a single container. Relocating between project sites takes days, not weeks.
-
मानक + संशोधित इमल्शन
The high-speed colloid mill produces both standard and polymer-modified emulsion — tack coat, chip seal, micro-surfacing and cold-mix with one machine.
-
सटीक, कम-बिजली हीटिंग
Total installed power stays under 34 kW. Process water is heated indirectly by 200–250 °C thermal oil with temperature measurement accurate to within 1 °C — stable formulation, lower running cost.
आपकी परियोजना के लिए कौन-सा FEITENG इमल्शन प्लांट उपयुक्त है?
Choose GRL-6 for compact, mobile 6 t/h production with precision colloid milling. Need higher capacity? See the QRL Series (5–20 t/h, factory direct). Want capacity options in a simpler configuration? Compare the RL Series (RL-6 / RL-10).
Not sure which fits? Send us your target output and emulsion formulation — our engineers will recommend the right configuration within 24 hours.
चरण 1 — जल और बिटुमेन तापन
पानी और बिटुमेन को प्रक्रिया तापमान पर लाएँ
Thermal oil at 200–250 °C heats the 3 m³ water tank indirectly, while heat-traced pipelines keep liquid bitumen at working temperature. Indirect heating avoids local overheating — this matters because overheated water or bitumen degrades the emulsifier and destabilises the final emulsion. Temperature measurement stays accurate to within 1 °C, so the formulation you set is the formulation you get.
चरण 2 — साबुन घोल तैयारी
Mix emulsifier solution in twin dosing tanks
Emulsifier solution is prepared in two 1.4 m³ dosing tanks working alternately: one tank feeds production while the other mixes the next batch, so the colloid mill never waits for soap. Switching between tanks follows a simple valve sequence operated from the control cabinet — continuous output without a second operator.
चरण 3 — मीटरिंग
Meter bitumen and soap into the colloid mill
The variable-speed bitumen pump and soap flow control valve hold your target ratio precisely. The panel displays pump speed in Hz — at 6 m³/h output with 50% bitumen content the reference setting is about 360 rpm / 19 Hz — and the glass rotor flow meter lets the operator verify soap flow at a glance. Accurate metering is what keeps bitumen content consistent from the first tonne to the last.
Step 4 — Colloid Mill Shearing
Shear the mix into fine, stable emulsion
Inside the colloid mill, high-speed shearing disperses bitumen into the aqueous phase as fine, uniform droplets. Droplet fineness determines how long the emulsion stays stable in storage and how evenly it sprays on the road — and the same mill handles both standard and polymer-modified formulations without hardware changes.
चरण 5 — शीतलन और निर्वहन
तैयार इमल्शन को ठंडा करें और निर्वहन करें
Finished emulsion passes through the heat exchanger for controlled cooling, then discharges to your finished-product tank or directly to distributor trucks. If bitumen ever blocks the exchanger, the built-in reverse-heating cleaning mode clears it without disassembly — hours of downtime instead of days.
मुख्य घटक
-
जल तापन टैंक
3 m³ tank heated by thermal oil, supplying process water for emulsifier solution preparation.
-
दो साबुन घोल टैंक
Two 1.4 m³ dosing tanks working alternately for continuous emulsifier supply during production.
-
बिटुमेन पंप
मिल में सटीक बिटुमेन मीटरिंग के लिए पैनल गति प्रदर्शन वाला परिवर्तनीय-गति पंप।
-
साबुन पंप
8 m³/h pump with flow control valve and rotor flow meter for accurate soap solution dosing.
-
Colloid Mill
Core high-speed shearing component forming fine, stable standard or modified bitumen emulsion.
-
हीट एक्सचेंजर
प्रक्रिया ताप विनिमय संभालता है; रिवर्स-हीटिंग सफाई मोड बिना अलग किए बिटुमेन अवरोधों को साफ़ करता है।
-
Thermal Oil Heating / Heat Tracing
200–250 °C thermal oil heats process water indirectly and heat-traces the bitumen pipelines.
-
नियंत्रण कैबिनेट
मोटरों, पंप गति, तापमान और उत्पादन अनुक्रम का केंद्रीकृत नियंत्रण — एक ही ऑपरेटर द्वारा संचालित.
Key Technical Parameters
Core specifications of the GRL-6 bitumen emulsion plant.
| Item | Specification |
|---|---|
| Model | GRL-6 |
| Product Type | Bitumen emulsion plant |
| Main Function | Standard bitumen emulsion and modified bitumen emulsion production |
| Production Capacity | 6 t/h |
| Overall Size | 6.8 × 2.2 × 2.53 m, board-cabinet design |
| Water Tank Capacity | 3 m³ |
| Emulsion / Dosing Tank Capacity | 1.4 m³ each tank |
| Total Installed Power | Less than 34 kW |
| Power Requirement | 380 V / 50 Hz regulated AC power, copper core cable section >25 mm² |
| Heating Method for Water | Thermal oil heating (indirect) |
| Working Temperature of Thermal Oil | 200–250 °C |
| Thermal Oil Capacity | 0.08 m³ (0.11 m³ including pipelines, ≈85 kg) |
| Temperature Measuring Error | Less than 1 °C |
| Bitumen Pump Reference Speed | About 360 rpm / 19 Hz at 6 m³/h output with 50% bitumen content |
| Soap Pump Flow | 8 m³/h pump capacity; e.g. 3 m³/h at 50% bitumen content |
Voltage, external pipelines, valves and accessory requirements are confirmed with your quotation.
अनुप्रयोग
-
सड़क रखरखाव ठेकेदार
Produce tack coat, fog seal and chip-seal emulsion at your own site, on your own schedule, instead of buying finished emulsion at market price.
-
इमल्शन आपूर्ति प्लांट
A compact line for regional plants supplying emulsion to multiple road projects — quick to install, simple to staff, easy to relocate.
-
संशोधित इमल्शन परियोजनाएँ
Produce polymer-modified emulsion for micro-surfacing and high-spec surface treatments with the same machine.
FEITENG द्वारा निर्मित — बिटुमेन उपकरण निर्यात के 15+ Years
GRL-6 is manufactured in our Dezhou factory alongside the bitumen equipment we have delivered to the UK, Zimbabwe, Mongolia, Uganda, the Maldives and more — including storage tanks supplied to the Wirtgen Group. Every unit ships with a one-year quality warranty, online commissioning support, and engineer dispatch on request.
Read the case: complete emulsifying and diluting equipment delivered to Zimbabwe →
RFQ चेकलिस्ट
For an exact GRL-6 quotation, tell us: target emulsion output, bitumen content and formulation, available thermal-oil or heating supply, power supply, finished-product storage method, installation space, and destination port.
GRL-6 FAQ
What is GRL-6 used for?
GRL-6 produces standard and polymer-modified bitumen emulsion for road construction and maintenance — tack coat, chip seal, micro-surfacing and cold-mix applications.
उत्पादन क्षमता क्या है?
6 t/h of finished emulsion. If you need 5–20 t/h factory-scale production, see the QRL Series emulsion plant.
What heating method does GRL-6 use?
Process water is heated indirectly by thermal oil at a working temperature of 200–250 °C, and bitumen pipelines are heat-traced with thermal oil — gentle, stable heating that protects the emulsifier.
क्या मशीन मोबाइल परियोजनाओं के लिए उपयुक्त है?
Yes. The complete line is pre-assembled in a 6.8 × 2.2 × 2.53 m board cabinet that ships as one container-sized module and relocates between sites with minimal re-installation.
भुगतान की शर्तें क्या हैं?
Usually T/T: 30% down payment, balance before delivery. L/C is also accepted. Trade terms: EXW, FOB, CFR and CIF.
डिलीवरी का समय कितना है?
About 20 days of production time after the down payment is received.
What warranty and after-sales support do you provide?
One-year quality warranty after delivery, with online support included. We can also dispatch engineers to your site for installation, commissioning and operator training.
क्या कीमत में स्थापना और कमीशनिंग शामिल हैं?
Installation and commissioning are quoted separately. Most customers complete installation with our online guidance; on-site engineer service is available on request.
ऑर्डर देने से पहले मुझे क्या पुष्टि करनी चाहिए?
Target output, emulsion formulation and bitumen content, power supply, site layout, finished-product storage, and destination port. Send these with your inquiry for an exact quotation.
Get a GRL-6 Quotation Within 24 Hours
संबंधित उत्पाद श्रेणियाँ
-
बिटुमेन इमल्शन प्लांट
Feiteng टैक कोट, प्राइम कोट, स्लरी सील, माइक्रोसरफेसिंग, कोल्ड मिक्स और सड़क...
-
बिटुमेन भंडारण टैंक
सड़क निर्माण, डामर संयंत्रों और टर्मिनलों के लिए Feiteng के बिटुमेन भंडारण...
-
पार्ट्स और सेवाएँ
Feiteng बिटुमेन भंडारण, हीटिंग, पिघलने, छिड़काव, इमल्शन और संशोधित बिटुमेन सिस्टम के...